BMW Wheels
Order Now - JDWheels.com
1-800-379-5333
06/06/2008
 Hit Counter

LTW Motor Sports

LTW-5 is designed for
all E-36, E-46 and E-90 3-series
& modified cars.

Staggered fitments

LTW5

17x8.5 +40     (72.6) 5x120     16.2 lbs. 1560 lbs. $249 ea.
17x9 +41     (72.6 – 74.1) 5x120     16.4 lbs. 1560 lbs. $259 ea.
18x9 +41     (72.6) 5x120     17.9 lbs. 1560 lbs. $349 ea.
18x10 +43     (72.6) 5x120     18.9 lbs. 1560 lbs. $359 ea.

 
LTW
Currently our focus is on high performance BMW fitments with our flagship wheel, the LTW-5.  Available in 17" & 18" fitments finished in Anthracite, Black Machined Lip, and Silver. The LTW-5 is designed for all E-36, E-46 and E-90 3-series and modified cars.  We also have hub-centric spacers available in 5, 10, 15, and 20mm to make them fit your modified ride perfectly.
Our factory uses only the finest virgin alloys to keep the end product inherently consistent and high quality.  Depending on the project, an appropriate casting method is selected.   For example, a high performance race wheel can be achieved economically with our proprietary Flow Forming technology. 
STEPS
The center area of the wheel is first cast in a low pressure mold, then removed and spun on a CNC machine where it is pressed, heated, and spun simultaneously, resulting in a semi-forged finish that forces the aluminum in the barrel area of the wheel to be thinner yet molecularly more dense, allowing more strength from less mass.  And we all know that less rotating mass is the name of the game in high performance.
Flow Forming
With our exclusive flow formed technology, we have the capacity to do this at costs typically one to two thirds less cost than fully forged wheels, all the while maintaining similar load bearing strength.

Our technological breakthroughs in heat treating allow us to further lighten the casting without sacrificing load tolerances.

Our EmPower wheel is 7 lbs lighter than the competition. This new performance wheel will be available in high & low offset fitments, with finishes in Chrome, Machine Lip Anthracite, and Machine Lip Silver

We are proud to introduce our first non Racing Wheel. The EmPower is now available for the E36, E46 and E90. Accepts the BMW factory center cap.


18x8.5 +40 1.25" lip


18x.9.5 +43 (rear) 3" lip

 

BMW 3-series from '92-'08 , including E36 (1992-1999 - 318i, 318is, 325i, 325is, 328i, 328is, 323is, and M3), E46 (1999-2005 323i, 323Ci, 325i, 325Ci, 328i, 328Ci, 330i, 330Ci), E90 (2006+ sedan - 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi), and E92 (2007+ coupe - 328i, 328xi, 335i, 335xi).
Tires range from 225-255mm on the 8.5" (front or rear)
and 255-275mm on the 9.5" (rear only).
18x8.5" Offset is +40mm, 18x9.5" Offset is +43mm.

 18x8.5 +40, +15 (72.6-74.1) 5x120 18.3 lbs  ($297 each.)
18x9.5 +43, +25 (72.6-74.1) 5x120 20.3 lbs.  ($314 each.)

 

JD Wheels - Performance Wheels & Tires 1-800-379-5333